INKCHIP Solution For Chipless Printing Chipless firmware recovery If, after a while, your printer starts displaying a message asking you to install ink cartridges, most likely the chipless firmware has been updated to the factory one and you need to restore the chipless firmware. STEP 1. Follow the procedure for downloading chipless firmware to the device by following steps 1-3 of this manual. STEP 2. In INKCHIP Activation, select your printer model, paste the recovery code into the Recovery Code field and click the Recover button. The program will send a request to the inkchip.net server and reactivate the chipless firmware. The recovery code must be saved when the device is initially flashed to chipless. For a specific device (identification is carried out by the serial number), only its recovery code is suitable. STEP 3. Turn off the printer using the off button and then turn it on again. Chipless firmware restored.
– Fix Errors: WF-C5790 ink out, ink cartridge is low, ink cartridge near end, ink cartridge is empty, incompatible ink cartridge.
– Modify printers Firmware -> printer will not require Ink Cartridges (IC Chips on cartridges) anymore. You will not need to reset ink chips or replace them if they are broken. Guaranty 100% money back if it does not work !!!