Epson WF C869RA,C869RE Service Repair Manuals Page 151-200

EPSON WF-C869Ra/WF-C869R Revision E Troubleshooting Error Display and Solution 152 Confidential 3RD NIP RELEASE SENSOR FAILURE ERROR (ERROR CODE: 034018) Cause Intermediate NIP Release sensor failure or Intermediate Release Solenoid failure. Suspected cause Intermediate NIP Release sensor failure Intermediate Release Solenoid failure Main board failure Troubleshooting MATCH ERROR BETWEEN MAIN ROM AND (PDL Program) (ERROR CODE:205604) μ SD ROM Cause Occurs when the firmware version of the main firmware and the μ SD (PDL Program) do not match. Suspected cause Firmware version of main firmware and the μ SD (PDL Program) do not match. Troubleshooting Perform the firmware update, and matching the firmware version of the Main firmware and μ SD (PDL Program). Step Check and measure Yes No 1 Check the Intermediate Release Solenoid and Intermediate NIP release sensor_1 Perform “Individual action check (A32 Nip Release Solenoid / Sensor)”. Did you hear of the solenoid operation sound? Go to step 2 Replace the Intermediate release solenoid. 2 Check the Intermediate Release Solenoid and Intermediate NIP release sensor_2 Perform “Individual action check (A32 Nip Release Solenoid / Sensor). Is the check result is not good? Replace the Intermediate NIP Release sensor. (If the trouble is not resolved, replace the main board) End
Page 2 of 5

Epson WF C869RA Service Repair Manual Page 151-200
Epson WF C869RE Service Repair Manual Page 151-200

Leave a Reply