EPSON WF-6090,WF-6530, WF-6590 Series Service Manual Page 241-264

Confidential Details of Adjustments 250 EPSON WF-6590/WF-6530/WF-6090 Series Revision C 2. On the displayed menu screen, select the “2. Printer Inspection Mode” and press the [Color] button. Figure 3-22. Start method of the Maintenance SP Mode (2) 3. When following message is displayed, and printer is started by the Maintenance SP Mode. Figure 3-23. Start method of the Maintenance SP Mode (3) Adjustment procedure Flowchart Figure 3-24. Head Angular Mecha Adjustment procedure flowchart Maintenance SP Mode Run : Color / Select : [3][6] 1. Touch Screen Calibration 2. Printer Inspection Mode 3. Status Sheet Print Mode Printer Inspection Mode Start the adjustment Confirm the adjustment pattern Line space is equal? Adjustment is finished. Start the printer with “Maintenance SP Mode” P rint the adjustment pattern from Adjustment program Release the Carriage Lock and move the Carriage unit to specified position. Check the adjustment pattern, and forecast the adjustment value when the line space becomes equal. Rotate the adjustment dial in accordance with forecast value. Confirm the misalignment direction.(+ or -) Release the Carriage Lock and move the Carriage unit to specified position Loosen the screws 90-deg Move the Adjustment dial for 1 step to the misalignment direction. Tighten the screws. Start the printer with “Maintenance SP Mode”, and print the adjustment pattern. Loosen the screws 90-deg Tighten the screws. Yes No
Page 6 of 20

Epson WF-6090 Series Service Manual Page 241-264
Epson WF-6530 Series Service Manual Page 241-264
Epson WF-6590 Series Service Manual Page 241-264

Leave a Reply