EPSON WF-6090,WF-6530, WF-6590 Series Service Manual Page 241-264

Confidential Details of Adjustments 259 EPSON WF-6590/WF-6530/WF-6090 Series Revision C 3.2.5 Touch Panel Adjustment This section describes the Touch Panel adjustment † Purpose To adjust the origin of the Touch Panel. † Tools Touch pen (without a sharp end such as a plastic stick) † Adjustment procedure 1. Start the Maintenance SP Mode by turning it on with [No.6] button, [No.4] button, and [Power] button on the Panel simultaneously. Figure 3-40. Touch Panel Adjustment (1) 2. On the displayed menu screen, select “1. Touch Screen Calibration” and press the [Color] button. Figure 3-41. Touch Panel Adjustment (2) During in the Maintenance SP mode, operations such as menu selection can be done by pressing the following buttons on the panel. Figure 3-39. Panel Operation in Maintenance SP Mode Power [3] Moves up menu selection. [Color] Enter [6] Moves down menu selection. Power button No.4 button No.6 button Maintenance SP Mode Run : Color / Select : [3][6] 1. Touch Screen Calibration 2. Printer Inspection Mode 3. Status Sheet Print Mode
Page 15 of 20

Epson WF-6090 Series Service Manual Page 241-264
Epson WF-6530 Series Service Manual Page 241-264
Epson WF-6590 Series Service Manual Page 241-264

Leave a Reply