EPSON WF-6090,WF-6530, WF-6590 Series Service Manual Page 241-264

Confidential Details of Adjustments 257 EPSON WF-6590/WF-6530/WF-6090 Series Revision C 4).Judgment the confirmation pattern 4)-1.Compare the density of the (A) area and (B) area in confirmation pattern of each factor, and count the (A) area that is higher density than (B) area. „ OK Condition When the (A) area that is higher density than (B) area is one or less. „ NG condition When the (A) area that is higher density than (B) area is two or more. 4)-2.Confirm the all confirmation pattern by the Step 4)-1 . Figure 3-36. SMAP runout adjustment _ Judgment the confirmation pattern If the Ok pattern is not existing in the five confirmation patterns, readjust from " 2) Select Block Number (p255)" . „ Sample of the Confirmation pattern Figure 3-37. Sample of the Confirmation pattern Factor = 0 Factor = 5 Factor = 10 Factor = 15 Factor = 20 : Density of (A) area and (B) area is the same. : Density of (A) area is higher than (B) area. (A) area (B) area
Page 13 of 20

Epson WF-6090 Series Service Manual Page 241-264
Epson WF-6530 Series Service Manual Page 241-264
Epson WF-6590 Series Service Manual Page 241-264

Leave a Reply