EPSON WF-6090,WF-6530, WF-6590 Series Service Manual Page 161-180

EPSON WF-6590/WF-6530/WF-6590 Series Revision C DISASSEMBLY/REASSEMBLY Disassembly and Assembly Procedure 165 Confidential 2.3.8.8 PF Sensor 1. Remove the following parts. † WF-6590/WF-6530 Series 1). Remove the Panel Assy. (P.66) 2). Remove the Paper Support Support. (P.62) 3). Remove the Left ADF Hinge Cover. (P.63) 4). Remove the Right ADF Hinge Cover. (P.64) 5). Remove the ADF/Scanner Unit. (P.181) 6). Remove the Panel Lower Front Cover. (P.68) 7). Remove the Right Upper Front Cover. (P.69) 8). Remove the Stacker Assy. (P.62) 9). Remove the Cassette Assy. (P.203) 10). Remove the Front Cover Microswitch. (P.69) 11). Remove the Front Housing. (P.70) 12). Remove the Middle Housing. (P.73) † WF-6590 Series 1). Remove the Upper Housing Assy. (P.78) 2). Remove the Panel Housing Front. (P.79) 3). Remove the Panel Assy. (P.80) 4). Remove the Panel Lower Front Cover. (P.81) 5). Remove the Right Upper Front Cover. (P.82) 6). Remove the Stacker Assy. (P.77) 7). Remove the Cassette Assy. (P.203) 8). Remove the Front Cover Microswitch. (P.82) 9). Remove the Front Housing. (P.84) 10). Remove the Middle Housing. (P.86) 2. Slide the Ink Supply Unit. (refer to "Ink Supply Unit" (p135) ) 3. Disconnect the cable from the connector. Figure 2-190. Removing the PF Sensor Holder (1) For the screw types, see ".1.2 Screw types used in the printer (p40)" . Connector Cable
Page 1 of 20

Epson WF-6090 Series Service Manual Page 161-180
Epson WF-6530 Series Service Manual Page 161-180
Epson WF-6590 Series Service Manual Page 161-180

Leave a Reply