EPSON WF-6090,WF-6530, WF-6590 Series Service Manual Page 141-160

EPSON WF-6590/WF-6530/WF-6590 Series Revision C DISASSEMBLY/REASSEMBLY Disassembly and Assembly Procedure 145 Confidential 8. Remove the two screw(S13). Figure 2-157. Removing the Cap Unit (3) 9. Remove the Waste Ink Joint Tube Assy while releasing the hook, and pull out the two Waste Ink Tube from the Waste Ink Joint Tube Assy. Figure 2-158. Removing the Cap Unit (4) „ In the following steps, waste ink may spill from the Cap Unit. Prepare waste cloths or similar in advance so as not to contaminate the surroundings. Be careful not to let the gears on the Cap Unit come off when removing the Cap Unit. „ S13 S13 Make sure to prevent the ink drop, because the ink may drop when removing the Ink tube. (For example: insert the cotton swab to Ink tube etc.) When connecting the two Waste Ink Tubes to the Waste Ink Joint Tube Assy, it is OK to connect them to either of the joints because of no specific designation. Waste Ink Joint Tube Assy Hook Waste Ink Tube
Page 1 of 20

Epson WF-6090 Series Service Manual Page 141-160
Epson WF-6530 Series Service Manual Page 141-160
Epson WF-6590 Series Service Manual Page 141-160

Leave a Reply