EPSON WF-4830, WF-4820 Series Service Manual Page 141-160

EPSON WF-4830 Series/WF-4820 Series Revision A Adjustment Adjustment Program 156 Confidential 4.2.3 Details of the Adjustment Program ADJUSTMENT (PRINT ADJUSTMENT BY PROGRAM) PTS delay adjustment Paper and feed tray Paper size: Paper type: Paper feed tray: Adjustment pattern A4 Plain paper Paper Cassette1st Judgment Select the pattern for which there is no gap and overlapping of the left and right patterns. Adjustment procedure 1. Start the Adjustment Program. 2. Select “PTS delay adjustment”. 3. The PTS delay adjustment menu appears. 4. Load paper into the paper feed tray. 5. Press the [Print] button to print the adjustment pattern. 6. Check the adjustment pattern. 7. Check the adjustment pattern and determine the adjustment value based on the judgment procedure 8. Enter the adjustment value. 9. Check that an adjustment value is entered and then press the [Finish] button to end adjustment.
Page 16 of 20

Epson WF-4830 Series Service Manual Page 141-160
Epson WF-4820 Series Service Manual Page 141-160

Leave a Reply